Features of Diamond Tube Wrench:
Diamond distribution is uniform.
The diamond is wearable and hard to fall off.
It will not slide to avoid damaging the drilling tools and ensure a long using life.
Diamond & T.C Wrenches are widely used in geological exploration, mining and other industries.
Available size:
40mm,43mm,45mm,47mm,53mm,56mm,57mm,58mm,60mm,71mm,73mm,74mm,89mm,92mm,95mm,99mm,117mm, 139mm
-
Diamond Tube Wrench
-
T.C Rod Wrench
-
-
-
-
Rod/Casing tap is suitable for fishing drill pipe and casing when drilling accident.
We can provide size BQ, NQ, HQ, PQ, BW, NW, HW(T), PW(T). Our rod/casing tap is heat-treated to ensure that the hardness is up to standard and not easy to wear.
Rod/Casing tap is suitable for fishing drill pipe and casing when drilling accident.
We can provide size BQ, NQ, HQ, PQ, BW, NW, HW(T), PW(T). Our rod/casing tap is heat-treated to ensure that the hardness is up to standard and not easy to wear.
-
Water Swivel
-
Water Swivel
-
Water Swivel
-
-
-
-
Water swivel is connected between the pump and the drill pipe through a high-pressure hose to make water or other drilling fluid to pass through the drill pipe.
Features of water swivel
Compact size and light weight
Drainage unobstructed
Rotary joint removable for easy maintenance
It can be matched with various diameter joint.
-
Hoisting Plug
-
Hoisting Plug
-
-
-
-
As a tool for connecting wire rope and drill pipe, the hoisting plug is widely used in the drilling field. It is usually used to pull or drop pipes. The normal convention thread is NW rod box.
Features of hoisting plug
1. Eliminate side jet in drilling fluid
2. Durable bearings can reduce the winding of hoisting rope during lifting and lowering.
Our heavy duty pipe wrench is wear-resisting and not skidding, size 8”,10”,12”,14”,18", 24", 36",48”,60” are available.
Our company can provide various sizes of international standard subs.
Our foot clamp/heavy duty foot clamp/hydraulic clamp have the features of fine detail and stable. Each clamp can be equipped with BQ, NQ, HQ and PQ size jaws.
Rod & Casing Cutter
When drilling in the hole, the cutter is used to cut the casing or drill pipe at any point. When the whole pipe cannot be retrieved so that the drill pipe or casing can be salvaged out.
It is easy operated and has good cutting performance.We can provide sizes AW, BW, NW, HW/HWT, PW/PWT.
Mud Mixer
1.Driven by parker hydraulic motor, reliable and stable.
2.The mud mixer is designed with a cone shape, ensure a better mixing efficiency.
3.The hydraulic oil hose adopts quick connector, which is easy and convenient for install and use.
Wireline Winch
The wireline winch is composed of motor (or diesel engine), clutch, transmission, drum, wire rope, brake and so on. It has the advantages of simple structure, reliable operation, low noise, small mechanical wear and wide application range. This series of winches is suitable for construction and installation companies, mining areas, factories, civil buildings and installation projects.
Loading Chamber
Our company can provide N, H size of loading chamber.
Relief Valve
Our company can provide high-quality pressure relief valve, which is mainly used for protecting the pump in the drilling process. It will reflect when the pressure exceeds the normal range. The staff can adjust the screw at the top of the pressure relief valve to adjust the pressure within the operating range.
Chuck Jaw
We can provide N,H,P chuck jaws to suit with CS14 rig.
Core Box
|
Our core boxes are made of new plastic with high quality.
|
Model
|
Size
|
Inseam
Length
|
Width of
each slot
|
Length of
Cores to hold
|
Lattices Nos
|
Weight
|
NQ
|
1070 × 385 × 55
|
1m
|
55 mm
|
5 m
|
5
|
2.20 kgs
|
HQ
|
1070 × 385 × 70
|
1m
|
69 mm
|
4 m
|
4
|
2.40 kgs
|
PQ
|
1070 × 385 × 93
|
1m
|
92 mm
|
3 m
|
3
|
2.80 kgs
|